AutomationShield
Arduino library and MATLAB/Simulink API for the AutomationShield Arduino expansion boards for control engineering educa…
C★ 51
diy-thermocam
A do-it-yourself thermal imager, compatible with the FLIR Lepton 2.5, 3.1R and 3.5 sensor with Arduino firmware
maxritterC++★ 1.2k⑂ 179 forksGPL-3.0updated 7 months ago
git clone https://github.com/maxritter/diy-thermocam.gitmaxritter/diy-thermocamREADME.mdfork it — it’s yours
DIY-Thermocam
The DIY-Thermocam V3 is an open-source thermal imager based on the FLIR Lepton LWIR sensor.
Check out the official website for more information about the project: www.diy-thermocam.net
This repository contains:
- Latest firmware releases
- Open-source firmware
- Desktop software
- Device enclosure
- Printed circuit board
more like this
ESPGeiger
☢️ ESP8266 / ESP32 Firmware for collecting and reporting statistics from Geiger counters
C++★ 53